Vodavi Starplus STSe, Quick Start Manual

Page: 16 / 72

STSe Quick Start Guide September 2005
- 12 -
VO D AVI
FLASH VOICEMAIL PROGRAMMING (cont’d)
Program Telephones to Operate with the Voicemail
- References to Programming: See Programming Manual, Section F. (Refer to list of Flash Codes and
Flexible Buttons, or Feature Codes for page reference.)
To program the voicemail (auto attendant) to answer incoming CO type calls, you must program CO Line Ringing
and/or CO Line Preset Fwd.
1. Dial * * 3226.
2. Press FLASH and dial 40.
3. Enter the CO Lines to be programmed or press HOLD for all COs.
4. Display shows CO Line Programming Page “A”.
5. Press Flexible Button 13 to display programmed ringing assignments.
6. Press Flexible Button 10 to program CO Line Ringing.
Display shows DDDR
DDD = number, Example Station 100 ; Voicemail 440
R = Ringing mode
1=Day, 2=Night, 3=Day Night, 4=Special, 5=Day Special, 6=Night Special, 7=All times, 0=Remove ringing
Normal setup is S100D = Station 100 rings Day (100 1 HOLD)
V440N = Voicemail ring Night (440 2 HOLD)
NOTE
: If you haven’t done so, program Station Call Forward Busy/No Answer to voicemail box.
Either can be accomplished at the phone ( see STSe User Guide ), or program FLASH 50,
Page “C”. If phones ring on incoming CO calls, program Call Fwd Busy and No Answer at
FLASH 50, Page “C”.
NOTE
: Program Flexible Button 24 as a voicemail button.
To program button from each telephone:
a. Press the SPEED button twice.
b. Press the flexible button to be programmed (Flexible Button 24).
c. Dial 440.
d. Confirmation tone heard. Button 24 is now programmed as personal voicemail button.
--- Programming is complete. ---