Vodavi Starplus STSe, Quick Start Manual

Page: 44 / 72

STSe Quick Start Guide September 2005
- 40 -
VO D AVI
UPGRADING SOFTWARE (cont’d)
In-Skin Flash Voicemail
1. Download software file from www.vodavi.com , Technical Support Downloads.
If you do not have a copy of ECOM, also download it now. ECOM can be found under “Software
Downloads”, “Voicemail Analog/Digital”. Download file: “Analog and Digital Voicemail Administration
Programming Software 346/486 Ver 3.12 Software”. ECOM is one of the two applications that are on
this download. Unzipping the download using the Wizard will open both programs: ADMIN and ECOM.
2. Unzip the “In Skin” upgrade file to your desktop.
3. Copy file to “A” drive or the CD drive.
4. Connect your PC to the In Skin Voicemail card using a straight through DB9 “Serial Cable” with
a “Female Gender Bender”. (This will give you two female DB9 connectors.)
5. Using your PC, access ECOM.
6. Set up ECOM connections by pressing “Alt P”.
a. Baud rate - 9600
b. Parity - None
c. Data Bits - 8
d. Stop Bits - 1
e. Flow Control – No Flow Control (This means that all boxes are unchecked)
7. Press ENTER .
8. At password prompt, enter “0000”.
9. At the menu prompt, “Dial 18 and press ENTER ”.
10. At the Programming Flash prompt, type “Y” and press ENTER .
11. Select upload icon. The upload icon can be identified by positioning the cursor over the symbol.
12. Select protocol – set to ASCII and click OK .
13. Select file to upload from floppy disk inserted in drive “A”.
14. Once file is selected (highlighted), click OK or press ENTER .
15. The process will begin and sometimes a progress bar will appear at the bottom of the screen to also
indicate in process has started. When the process is completed, the screen will change to reflect the
Programming Flash prompt.
16. Type “Y” and press ENTER .
17. Wait for the “Main Menu” to return.
NOTE
: This process could take several minutes … in some cases, over 30 minutes.
When the Main Menu returns, type “Exit”. Power down the BKSU and then power the BKSU back-up.
Connect to the In-Skin using Hyper-Terminal and check the Version item to confirm the software has been
updated. The software on the In-Skin Voicemail has been successfully upgraded.
In-Skin Hard Drive Voicemail
Follow the instructions on CD sent from Vodavi Communications and follow the prompts using the Hard
Drive ADMIN wizard to upload software. Or download software from
www.vodavi.com and follow
instructions as above.