VMAC - Vehicle Mounted Air Compressors
VMAC Technical Support: 888-241-2289
VMAC Knowledge Base: www.kb.vmacair.com
51
Figure 69 — Installing the front battery box
☐
Raise the battery box and straps into position. The battery box mounts
straddle the radius arm mount on the driver side of the frame. Remove any
barbed cable ties as needed to allow the OEM wiring harness to pass over the
top of the battery box cover (Figure 69).
Ensure the battery mounts and fasteners will not crimp or pinch any
wire harness or brake lines that run along the top of the frame rail.
Run the fasteners below any harness / brake lines.
☐
Install the backing straps and tighten the assembly to the frame to prevent the
bracket from shifting.
☐
Torque the mounting fasteners to specification.
☐
Remove the top rear fastener from the mounting bracket (Figure 70)
Rear bracket:
P/N: 1200978
Front bracket:
P/N: 1200977
M10 x 1.5 x 150
(×2) M10 x 1.5 x 130
Figure 70 — Installing the front battery box
Remove fastener