VMAC - Vehicle Mounted Air Compressors
VMAC Technical Support: 888-241-2289
VMAC Knowledge Base: www.kb.vmacair.com
43
☐
Apply Loctite 242 (blue) to the fasteners and install the tank mounting brackets on
the frame (Figure 59).
•
The front tank mount bracket mounts to the rear of the transmission cross
member.
•
The rear tank mount bracket mounts to the rear of the cab mount.
Figure 59 — Installing the AOST
(Front tank clamp not shown for clarity)
Front of vehicle
(×4) 3/8 in
washers
(×4) 3/8 in × 6 in bolts
(×4) 3/8 in ×
1 1/2 in bolts
Spacer bar
The top bolt on the forward tank mount will need to be installed
from the inside of the frame (Figure 59).
☐
Install the front and rear tank straps onto the frame mount brackets (Figure 59).
☐
Remove the tank clamp pinch bolts.
☐
Install the tank clamps over the front of the tank and slide them toward the
centre of the tank.
(×4) 3/8 in flange
lock nuts
Offset bracket
(×8) 5/16 in
bolts
(×4) 3/8 in
lock washers
(×4) 3/8 in nuts
The top bolt on the forward tank mount will need to be installed
from the inside of the frame (Figure 59).
