VMAC - Vehicle Mounted Air Compressors
VMAC Technical Support: 888-241-2289
VMAC Knowledge Base: www.kb.vmacair.com
56
☐
If removed earlier, reinstall the park brake bracket fastener (Figure 73 on page
53).
☐
Reinstall the cable run tray on the body mount.
☐
Reattach the cable to the cable run tray with cable ties.
☐
Support the crossmember guard and remove the (×2) OEM fasteners underneath
the forward park brake cable standoff and set them aside (Figure 79).
☐
If required, install the supplied clip nuts (Figure 80, or Figure 81).
Figure 79 — Vehicle supplied with skid plate
Figure 80 — Vehicle supplied without skid plate
If the vehicle is not supplied with a skid plate, install the master
battery disconnect assembly using the supplied clip nuts and
fasteners.
Figure 81 — Vehicle supplied without skid plate (alternate frame)
Remove OEM
fasteners
Install clip nuts
Install clip nuts