VMAC - Vehicle Mounted Air Compressors
VMAC Technical Support: 888-241-2289
VMAC Knowledge Base: www.kb.vmacair.com
37
☐
Install the alternator using the OEM alternator bolts
☐
Install the retained rubber bushings onto the (×4) OEM fasteners and mount the
bracket onto the engine. The VMAC bracket uses the same mount location as
the OEM bracket.
☐
Reconnect the primary alternator wiring.
☐
Install the power steering pump onto the VMAC main bracket using the (×3)
OEM bolts.
☐
Reinstall OEM cable tray bolt.
☐
Protect the battery cables in the cable tray using a piece of the scrap radiator
hose retained from earlier in the installation and secure with a cable tie.
☐
Reinstall the power steering pump pulley if removed.
☐
Install the OEM idler onto the VMAC main bracket in the location noted when
the idler was removed (Figure 49).
☐
Install the stator mount onto the VMAC main bracket (Figure 50).
Figure 49 — Installing the OEM idler
Figure 50 — Installing the stator mount
Dual alternator
idler location
Fan stator
mount
Single alternator
idler location