VMAC - Vehicle Mounted Air Compressors
VMAC Technical Support: 888-241-2289
VMAC Knowledge Base: www.kb.vmacair.com
90
Resetting the Throttle Control
The following steps can be used to reset the Throttle Control to an
approximate factory “tune”.
Clearing the Throttle Control
☐
With the engine off, rotate the “MAX RPM”, “IDLE DOWN PRESSURE” (IDP) and
“VR IDLE” adjustment screws counterclockwise 20 full turns (Figure 130).
The Throttle Control uses 20 turn adjustment screws, turning the
screws past this point will not damage the Throttle Control.
2017 Throttle Tune
☐
While counting the turns, rotate the adjustment screws:
•
“MAX RPM”: 10 turns clockwise.
•
IDP: 15 1/2 turns clockwise.
•
“VR IDLE”: 3 turns clockwise.
2018+ Throttle Tune
☐
While counting the turns, rotate the adjustment screws:
•
“MAX RPM”: 15 turns clockwise.
•
IDP: 15 1/2 turns clockwise.
•
“VR IDLE”: 10 turns clockwise.
Figure 130 — Throttle Control Adjustments
“VR IDLE”
adjustment screw
“MAX RPM”
adjustment screw
“IDLE DOWN PRESSURE”
adjustment screw
