VMAC - Vehicle Mounted Air Compressors
VMAC Technical Support: 888-241-2289
VMAC Knowledge Base: www.kb.vmacair.com
11
☐
Remove the upper radiator hose and cover the ports to prevent debris
accessing the engine or coolant system.
☐
Cover the turbo and CAC ports to prevent debris entering the engine.
☐
Disconnect the rest of the CAC connections and cover the openings to prevent
debris entering the engine air intake or coolant systems.
☐
Remove the CAC.
☐
Remove the driver side battery tray and degas bottle assembly. This will not be
reused but can be retained should the vehicle be reverted to stock.
☐
Mark the washer fluid pump wire harness for modification in a later chapter.
☐
Remove the front (×3) inner fender liner bolts and pull the fender liner out of the
way to access the fasteners securing the washer fluid reservoir.
☐
Disconnect and remove the washer fluid reservoir and battery tray support
bracket.
☐
Thoroughly clean the surface around the M12 threaded hole on the front driver
side of the engine block, directly below the valve cover (Figure 5).
Figure 5 — Installing the negative battery cable
Clean surface
