VMAC - Vehicle Mounted Air Compressors
VMAC Technical Support: 888-241-2289
VMAC Knowledge Base: www.kb.vmacair.com
40
☐
Remove the protective covering and reinstall the Viton O-ring and inlet onto the
compressor. Torque to specification (Figure 54).
The inlet valve is secured with bolts of varying lengths. Install the
longer bolts nearest to the air filter. Installing the bolts in the wrong
location will damage the compressor housing when tightened.
Figure 54 — Install the inlet
Figure 55 — Air filter cover relief cut
☐
If Required: Loosen the nut securing the filter cover, rotate the cover to align
the relief cut with the brake fluid reservoir and retighten the nut (Figure 55).
Shorter bolts
Longer bolts
Due to differences in vehicle configuration, there may be
interference between the VMAC air filter cover and the vehicle’s
brake fluid reservoir.
