VMAC - Vehicle Mounted Air Compressors
VMAC Technical Support: 888-241-2289
VMAC Knowledge Base: kb.vmacair.com
26
Identifying Your System
The System ID will be requested any time that parts are ordered, when calling for
technical support or submitting a warranty claim.
The system ID is the preferred method of identifying the system as it serves as
a master record of all of the components in the system. The system ID plate is
located on the frame near the oil drain extension (Figure 8).
An alternative method of identifying the system is via the compressor serial
number which is found on a plate attached to the compressor. This is a less
desirable method of identifying the system as it may not link back to the original
system if it has been replaced.
System ID breakdown
The system ID provides specific information about the system such as the model,
revision, production date and the unique identifier (Figure 9).
Figure 8 — System ID location
Figure 9 — System ID breakdown
Model number
Revision letter
Production date code
Unique identifier
A BC 123
G300004
