VMAC - Vehicle Mounted Air Compressors
VMAC Technical Support: 888-241-2289
VMAC Knowledge Base: kb.vmacair.com
61
Figure 37 — Compressor oil fill
☐
Check the oil level at the sight glass on the front of the WHASP Tank. Continue
adding oil until the level is correct.
☐
Reinstall the fill cap.
☐
Clean the WHASP Tank around the coalescing filter to prevent contamination.
☐
Remove the spin on coalescing filter by turning it counterclockwise (Figure 38).
☐
Remove the filler cap on the WHASP Tank. Fill the WHASP Tank with VMAC
compressor oil until is reaches the “MAX” mark. The air compressor system
holds approximately 4 L (1 USG) of oil (Figure 37).
Figure 38 — Coalescing filter
(PTFE lines removed for clarity)
