Vitek VT-8346, Manual Instruction

Page: 3 / 32

3
ENGLISH
IRON VT-8346
The iron is intended for ironing clothes
and bedding and for vertical steaming of
fabrics.
DESCRIPTION
1.
Water spray nozzle
2.
Water inlet lid
3.
Continuous steam supply knob
4.
Burst of steam button
5.
Water spray button
6.
Heating element on/off indicator
7.
Power cord protection
8.
Base
9.
Water tank
10.
Soleplate
11.
Temperature control knob
12.
« » button
13.
« max» water level mark
14.
Beaker
SAFETY MEASURES
Before using the unit, read this instruction
manual carefully and keep it for future refer-
ence.
Use the unit for intended purposes only, as
specified in this manual. Mishandling the unit
can lead to its breakage and cause harm to the
user or damage to his/her property.
• Before plugging the unit in, make sure that
the voltage of your mains corresponds to
the operating voltage of the iron.
• The power cord is equipped with a euro
plug; plug it into the socket with reliable
grounding contact.
• To avoid fire or electric shock, do not use
adapters for plugging the unit in.
• To avoid mains overloading, do not switch
on several electrical appliances with high
power consumption at a time.
• Do not fill the water tank with scented liq-
uids, vinegar, starch solution, descaling
reagents, chemicals etc.
• Do not let the power cord be on the ironing
board and touch hot surfaces.
• Do not leave the unit unattended. During
breaks in operation put the iron on the base
(in vertical position).
• Before plugging/unplugging the iron, set
the temperature control knob to the mini-
mum position and switch the continuous
steam supply off. Always unplug the iron
when you are not using it.
• To unplug the iron, always hold the power
plug, do not pull the power cord.
• To avoid electric shock, do not immerse the
iron, the power cord and the power plug into
water or any other liquids.
• Before taking the iron away, let it cool down
completely and pour out the remaining
water.
• Clean the unit regularly.
• Do not immerse the unit body, the power
plug or the power cord into water or any
other liquids.
• Do not touch the unit body and the power
plug with wet hands.
• This unit is not intended for usage by chil-
dren.
• Place the unit out of reach of children during
the operation and cooling down.
• The unit is not intended to be used by peo-
ple with physical, sensory or mental dis-
abilities (including children) or by persons
lacking experience or knowledge if they
are not under supervision of a person who
is responsible for their safety or if they are
not instructed by this person on the usage
of the unit.
• Do not allow children to touch the unit body
and the power cord during the unit opera-
tion.
• Do not leave children unattended to avoid
them using the unit as a toy.
• For children safety reasons do not leave
polyethylene bags used as packaging unat-
tended.
Attention! Do not allow children to play with
polyethylene bags or packaging film. Danger
of suffocation!
• If the power cord is damaged, it should be
replaced by the manufacturer, a mainte-
nance service or similar qualified personnel
to avoid danger.
• Do not attempt to repair the unit. Do not dis-
assemble the unit by yourself, if any mal-
function is detected or after it was dropped,
unplug the unit and apply to any authorized
service center from the contact address list