Vitek VT-1766, Manual Instruction

Page: 3 / 25

5
ENGLISH
4
for HoUSEHoLd USaGE oNLY
Before first usage
- Unpack the unit and remove the packing materi-
als. Examine the unit for damages. Do not switch
on the unit if there are any damages in it.
Note:
- if the unit was subjected to negative tempera-
tures, before switching it on for the first time,
keep it at room temperature for 30 minutes.
- use the unit at +5 - +40°С temperature, and rela-
tive humidity less than 80%.
- water temperature should not 40°С.
- Before switching on the unit, make sure that the
voltage of the electric network corresponds to
the operating voltage of the unit.
Using the ultrasonic air humidifier
- Remove the lid (2) from the water tank (4).
- Take the handle (3) of the water tank and
remove it from the body.
- Turn over the tank (4); unscrew the lid (6), by
turning it anti clockwise.
- Fill the water tank (4) with necessary quantity of
water and screw the lid (6), by turning it clock-
wise.
- Set the filled tank (4) on the body of the unit.
Wait for some time, which is necessary to fill the
operating chamber (8) with water.
- Insert the plug into the socket. You will hear a
sound signal and the room temperature indica-
tions (23), room relative humidity indication (24),
on/off indication (21) will appear on the display
and the water tank lighting (9) will light up.
- Switch on the unit, by touching the (15)
«POWER» button, the air humidifier will switch
on, the indication (21) will go out.
- After operation, switch off the unit, by touching
the (15) «POWER» button and take the plug out
of the socket.
Note:
- Each pressing of the control buttons will be
accompanied with a signal.
- If no actions are performed then in 30 seconds
the brightness of the display (12) will decrease
automatically.
functions of the buttons on the control panel
(11)
«PoWEr» on/off button
- Touching the button (15) switches on and the
repeated touching switches off the air humidifier.
«HUmIdItY» HUmIdItY LEVEL INdoorS
SEttING BUttoN (16)
- Touching the «HUMIDITY» button (16) you can
set the desired level of the room humidity from
45 to 90% with step 5%. Digital value (24) of
the humidity will be displayed (12). When the
humidity in the room reaches the preset value,
steam supply will stop. We recommend main-
taining relative humidity 40-60% in the room.
Note:
- After setting of the relative humidity in 5 sec-
onds the humidity value in the room (24) will
appear on the display (12).
- To view the value of the humidity, touch the
«HUMIDITY» button (16), digital value of the
humidity will be displayed for 5 seconds, after
it, value of the relative humidity in the room will
be displayed.
«maX/mIN» humidity intensity control button
(17)
- Touching the «MAX/MIN» button (17) you can
control intensity of steam output, which is
reflected on the display (12) by the scale (22).
«tImEr» on/off button (18)
- Touching the «TIMER» button (18) you can set
operation time of the air humidifier from 1 to12
hours with step 1 hour. Digital value of the timer
time (23) will be displayed (12).
Note:
- Digital value of the room temperature (23) and
the timer operation time (23) will change on the
display (12) in each 30 seconds.
«HEatING» heating element on button (19)
- When touching the «HEATING» button (19)
the heating element switches on, and already
warmed water will get on the sprayer (10). Due
to this steam of comfort temperature will go out
from the nozzle (1). The advantage of this mode
is that the temperature in the room, where the
humidifier is, does not decrease; besides that
bacteria are killed. When the heating element
switches on the indication (25) appears on the
display (12). To switch off the mode, touch the
«HEATING» button (19) again. The heating ele-
ment will switch off and the indication (25) will
disappear from the display (12).
Note:
- Switching on of the heating function can insig-
nificantly change indications of the room tem-
perature (23) and the room humidity (24) on the
display (12).
«oZoNE» ionization mode on button (20)
- Negatively charged ions (anions), contained
in the air, are useful for health. Anions improve
operation of the lungs, stimulate blood circu-
lation and protect a person from respiratory
diseases. In closed rooms, especially when the
equipment operates there is a lack of anions in
the air that is why additional ionization of the air
is required.
- To switch on ionization mode of the air touch
the «OZONE» on/off button (20) the indication
(27) will appear on the display (12). Touch the
«OZONE» button (20) again and the ionization
mode will switch off and the indication (27) will
disappear from the display (12).
Empty water tank indication (26)
- If there is no water in the water tank (4) you
will hear 10 signals and the indication (26) will
appear on the display (12).
Note:
- You can determine amount of water in the water
tank (4) with the help of the lighting (9).
remote control (13)
Correspondence of the buttons on the remote con-
trol (13) to the buttons on the control panel (11)
28. On/off button – corresponds to the «POWER»
button (15).
29. Ionization mode on/off button – corresponds
to the «OZONE» button (20).
30. Water heating mode on/off button – corre-
sponds to the «HEATING» button (19).
31. TIMER time setting button – corresponds to the
«TIMER» button (18).
32. Relative humidity indoors setting button – cor-
responds to the «HUMIDITY» button (16).
33. Humidity intensity setting button – corresponds
to the «MAX/MIN» button (17).
cleaning and care
Warning: Always switch off and unplug the unit
before cleaning.
Hard water causes the appearance of scale on the
«sprayer»(10), on the operating chamber (8) and
on the water tank (4); it leads to improper opera-
tion of the unit and appearance of white deposit on
the interior. To avoid it:
- use boiled water or water, which stood for some
time, water, purified by filter or distilled water;
- clean the operating chamber (8) weekly;
- change water in the water tank (4) more often.
Weekly care
- Once a week carefully wash the water tank (4)
and the operating chamber (10) with a neutral
washing liquid solution. After that, carefully
rinse them with water.
- Add 5-10 drops of the cleaning agent on the
«sprayer» (10); wait about 2-5 minutes. Use the
brush (14) to remove the deposit from the sur-
face of the “sprayer” (10).
Note:
- As a cleaning agent for the “sprayer” you can
use substances for scale removal in kettles.
- Do not immerse the unit into water or other
liquids.
cleaning the filter-cartridge (5)
- The filter-cartridge (5) prevents generation of
bacteria, softens water and removes unpleas-
ant odor.
- Clean the filter –cartridge (5) after about 200 l
of water pass through it, and when using hard
water or appearance of white deposit on the
furniture- more often.
- Take the handle (3) of the water tank (4) and
remove the water tank from the body.
- Turn over the water tank (4), unscrew the lid
(6) by turning it anti clockwise and remove the
filter-cartridge (5), by turning it anti clockwise.
- Put the filter-cartridge (5) for 10 minutes into
the bowl with vinegar, take out the filter-car-
tridge (5) and wash it under warm tapping
water.
- Place the filter-cartridge (5) back on the lid (6),
by turning it clockwise.
replacing of the filter-cartridge (5)
- Replace the filter-cartridge (5) when neces-
sary.
Storage
- Before taking the unit away for storage, pour
out water from the water tank (4) and from
the operating chamber (8), wipe the operating
chamber (8) dry.
- Do not store the unit with water in the water tank
or if water remains in the operating chamber.
- Before you take the filter-cartridge (5) away for
storage, clean and dry it, keep the filter car-
tridge in a cool darkened place.
- Keep the humidifier in a dry cool place out of
reach of children.
5
ENGLISH