Vitalcare 506DN3, Service Manual

Page: 32 / 254

Section 1 —Introduction
Page 1-20 VitalCare
TM
506N3 Series Service Manual Criticare Systems, Inc.
Voltage Fluctuations
The monitor is suitable for connection to AC (mains) voltage as
defined by EN61000-3-3 and EN61000-4-11. When operated in the
line voltage range specified in this manual any fluctuation will have a
negligible effect. Very low line voltage will cause the monitor to revert
to battery power. Very high line voltage may cause damage to the
charger circuits. The monitor is designed with circuitry that will turn
the unit off before spurious readings can be caused by a low battery
condition.
Defibrillation, HF, and
Electronic Device
Protection
The monitor when used with its recommended accessories is
protected against the effects of the discharge of a defibrillator and the
use of HF electrosurgical equipment. The monitor presents no known
adverse effects to pacemakers or other medical safety equipment.
Biocompatibility
All patient-contact or user-contact materials in this monitor and it's
accessories have passed ISO 10993-5, -10, & -11 biocompatibility
tests or have been in use in clinical environments in large numbers
over an extended period of time predating these standards.
Latex Content
All Criticare Systems, Inc., products, including patient monitors and
accessories, are free from latex in any location that may result in
patient contact.
DEHP Content
All Criticare Systems, Inc., products currently shipping are free of
DBP and DEHP in any areas that would be intended for patient
contact with blood, mucous membranes, or continuous skin/tissue
contact.