Vista Viper series User Manual Download

Page: 88 / 127

VIPER user manual V1.0

PRESET SETTING

A preset is a set of specific target points of a PTZ camera and up to 128 presets per camera can be

stored.

1) In PTZ Control mode, use the direction buttons to adjust the camera to desired direction. Firstly

set the preset number and then adjust the camera to the desired direction.

2) And then, select the <Setup-Preset> key

A virtual keyboard will appear to input the desired name.

3) Save: You can save the preset settings by click OK button in the virtual keyboard.

4) Preset Call: when the users select the stored location number, the camera will move to the

selected location.

5) Delete>

: It will delete the selected preset information.

Depending on the IP cameras, the Tour, Scan

and Pattern setting may not be available in

the NVR.

Summary of Contents for Viper series
































































































































Search results

Summary of Contents for Viper series

Reviews:

Related manuals for Viper series

Brands by name

Popular brands

Vista Viper series, User Manual

Search results

Summary of Contents for Viper series

Reviews:

Related manuals for Viper series

Brands by name

Popular brands