VIPER user manual V1.0
87
USING THE PTZ CAMERA1
You can use one camera to perform all functions of PAN, TILT & ZOOM (PTZ) for monitoring multiple
places and set the preset to your preference in a desired mode.
1) PTZ Direction Button/Wheel: Click to
any given direction you wish to view. You will be
able to view 360 degree.
Or, click mouse right button and drag to control pan and tilt. If you drag longer, pan/tilt speed will
be faster.
2) ZOOM In/Out
: You can use the Zoom function of the PTZ camera for closer
view.
Or, you can zoom in/out using mouse wheeling.
3) IRIS
: Adjusts the intensity of radiation incoming to the iris. (this function is only
available for the cameras supporting iris control function.
4) FOCUS
: Enables you to adjust the focus manually.
5) Preset: the camera can set the position of the preference area.
6) Tour: The camera automatically runs between/among the preset points that you selected.
7) Scan: The camera moves to the preset points in the specified sequence. If multiple presets are
specified, the PTZ camera will automatically move to all of the preset points sequentially.
(some
PTZ model may not support this function)
8) Pattern: Makes the PTZ camera remember and follow the past route.
(some PTZ model may not
support this function)
9) <Setup-Preset>
: You can change the preset numeric value and name, and Tour setting.
10) Delete Preset>
: You can delete the preset and tour position setting.
Before entering the PTZ device control mode, set the Values of the PTZ device in the < PTZ Control
Cam #> menu.
