Vista Viper series User Manual Download

Page: 49 / 127

VIPER user manual V1.0

3.4.5.3. User

Once you create the Group, you can add the User on that Group.

NOTE: Users can be added only if a Group has already been established.

When selecting “Add” from the window, a window for “Add User” will appear. You can configure

the Network Viewer setting including Name, ID, Select Group and Password (include Confirm PW).

Result of the user setup appears in the User window. To change the user property, use the “Edit

User” setting window. The “Edit User” window appears when you select a desired item to be

changed in the User window.

When the user setup is complete, click <OK>.

3.4.5.4. Setup

You can set restricted access for all general users. Items with restrictions will require logging in for use.

1) Restricted Access: Select what menu would

be permitted or not to the user. Live view,

Backup, Search, PTZ can be selected.

B) Auto Log Out: A user will be automatically

logged out if there is no operation on NVR for

over set period of time.

Summary of Contents for Viper series
































































































































Search results

Summary of Contents for Viper series

Reviews:

Related manuals for Viper series

Brands by name

Popular brands

Vista Viper series, User Manual

Search results

Summary of Contents for Viper series

Reviews:

Related manuals for Viper series

Brands by name

Popular brands