VIPER user manual V1.0
59
3.5.7. Email
You can send Email to registered NVR users.
There are four sub-menus under Email: SMTP,
Event, Schedule & Recipient.
3.5.7.1. Email: SMTP
SMTP mail server:
1) Server Type: Displays the connected server
type.
2) Server: Enters a server to connect to.
3) Port: Sets the communication port.
4) User Authentication: Click the check box next
to User Authentication if the SMTP server requires
user authentication. The account input box will be
activated.
5) User: Enter a user to use authentication when
connecting to the SMTP server.
6) Password: Enter the password of the SMTP
server user.
7) Secure Transfer: you can select Never or
TSL/SSL.
8) Sender: Use the virtual keyboard to enter the
sender’s email address.
9) TEST: Conducts the test on the server settings.
10) When the SMTP setting is complete, click OK.
3.5.7.2. Email: Event
You can set the interval and type of event that will be sent to the user. You may select Periodic
Notification and/or Scheduled Notification.
Periodic Notification:
1) Summary Interval: Enable/Check mark the
Summary box to set the event summary interval time
(5 min – 24 hr.) A summary of events will be sent out
on specified interval time set and one can enable or
check mark the box (Picture Transfer) to receive JPG
attachment of picture.
2) Use Event Transfer: Select an event type to send if
an event occurs. If the selected event occurs, an e-
mail will be sent to the group that has the recipient
authority.
3) Channel Setup: By clicking the Channel Setup
button, you can select desired channels for Event.
