VIPER user manual V1.0
42
3.3.2. Sensor / Video Loss Detection Setup
Select the right type of your external sensors connected to NVR.
1) Sensor # (4CH:1~4 / 8,16CH:1~8): means
sensor input number (terminal block of rear panel)
2) Type [Off / N.O. / N.C.]
N.O.: “Normal mode- Open”. Two sensor lines are
not connected (=open) in the normal mode.
Sensor lines will be connected (=close) in the
activation mode.
N.C.: “Normal mode-Close”. Two sensor lines are
connected (=close) in the normal mode.
Sensor lines will be disconnected (=open) in the
activation mode. Click OK to save and exit.
3) Cam: You can select the camera channel
which can be associated with the sensor. Once
the camera is selected, “Cam channel and Preset
Setup” window will appear. Select a channel and
setup the preset number. (ex, PTZ functional
camera).
4) Video Loss: Select ON or OFF for each
channel. When the video loss on the certain
channel is occurred, the NVR system will trigger
the event.
3.3.3. Alarm Out Schedule
You can set the conditions and operating hours for scheduled alarms.
IF the user wants to set the Alarm recording, the user should first set all the Alarm settings
under the “Alarm Out Schedule” menu.