SMS REPORT
disable
Define whether the system will report events to the Monitoring Stations'
SMS receivers
via the
SMS
Channel. For further information, see section 3.6.4 options 26 & 27.
Options:
disable
;
enable.
GPRS APN
Enter the name of the
APN Access Point
used for the internet settings for the
GPRS
(up to 16
digits string).
Note:
To enter the APN Access Point
,
use the “String Editor” in section 3.8.1.
GPRS USERNAME
Enter the
Username
of the
APN
used for
GPRS
communications (up to 16 digits string).
Note:
To enter the Username
,
use the “String Editor” in section 3.8.1.
SIM PIN CODE
Enter the
PIN code
of the
SIM card
installed in the
GSM
module (up to 8 numerical digits).
Note:
To enter the numerical PIN code, use the numerical keyboard.
GPRS PASSWORD
Enter the
Password
of the
APN
used for
GPRS
communications (up to 16 digits string).
Note:
To enter the Password, use the “String Editor” in section 3.8.1.
The GSM roaming algorithm support cases where the panel is connected to the network but
the GPRS connection has timed-out. In such cases the panel attempts to connect to a different
network. Select one of the following options:
NETWORK
ROAMING
Modem roam en
Modem roam en
The internal cellular modems algorithm for roaming is enabled (roaming (en) = enable).
Roam disable en
Roaming is not allowed. Only the ‘Home’ network is enabled (accepted (en) = enable).
Manual roam en
The panels algorithm selects the best cellular operator (operator (en) = enable).
Lock network
:
The operator that is defined in ‘Requested Operator’ option in the panel is selected ((en) =
enable).
Previously known as
"FORCE HOME
NTWK"
REQUEST
OPERATOR
This option specifies a preferred network for example, Vodafone UK. The device attempts to
register with this network when the signal strength is above the minimum CSQ value. When a
requested network is specified the device attempts to return to this network on every other
attempt.
Note
: Contains an editable line to enter up to 6 MCC (Mobile Country Code) nMNC
(Mobile Network Code) numbers.
Previously known as
"SESSION
TIMEOUT"
GPRS ALWAYS ON
disable
Define whether the control panel will stay continuously connected "
enable
", via GPRS
communication, or disconnect "
disable
", after each report session.
Previously known as
"SESSION TIMEOUT"
Options:
Enable
or
Disable
.
42
D-306919 KP-250 PG2 Installer’s Guide
