Option and default
Configuration Instructions
55:BACK LIGHT
OFF after 10sec
Define whether the panel's back lighting will remain on at all times or will turn on
only when a key is pressed and turn off within 10 seconds if no further keystrokes
are sensed.
Options:
always ON
and
OFF after 10sec
.
56:SCREEN SAVER
off
The Screen Saver option (when activated) replaces the status display on the control
panel with “PowerMaster-10” / “PowerMaster-30” if no key is pressed during more
than 30 seconds.
You can activate the Screen Saver and determine whether the status display will
resume following any key press (
refresh by Key
) or by entering a code or
presenting the proximity tag to the tag reader (
refresh by Code
). If
refresh by Key
is selected, the first pressing of any key (except Fire and Emergency) will produce
the status display and the second press will perform the key function.
With Partition disabled
Options:
off
;
refresh by code
and
refresh by key
.
Notes:
1. To comply with
EN
requirements, "refresh by code" must be selected.
2. For Fire and Emergency keys, the first key press will produce the status display and
will also perform the Fire/Emergency function.
56:SCREEN SAVER
off
Certain regulations require that the system status display will not be exposed to
unauthorized persons. The Screen Saver option (when activated) replaces the
system status indication on the LCD with idle text if no key is pressed during more
than 30 seconds.
You can activate the Screen Saver option and determine whether the status display
will resume following any key press (
Text - by Key
) or by entering a code or
presenting a proximity tag to the tag reader (
Text - by Code
). If
Text by Key
is
selected, the first pressing of any key (except Fire and Emergency) will produce the
status display and the second press will perform the key function.
You can also determine that if no key is pressed during more than 30 seconds the
date and time will appear on the display. You can determine that normal display will
return after pressing the
button followed by entering the user code or
presenting the proximity tag to the tag reader (
Clock - by Code
) or after pressing
any key (
Clock - by Key
).
With Partition enabled
Options:
off
;
Text - by code
;
Text - by Key
;
Clock - by Code
;
Clock - by Key
.
Note:
1.
To comply with
EN
requirements, "refresh by code" must be selected.
2. For Fire and Emergency keys, the first key press will produce the status display and
will also perform the Fire/Emergency function.
34
D-306919 KP-250 PG2 Installer’s Guide
