3.4.4 Modifying or Reviewing a Device
To
Modify
or
Review
the device parameters, complete the following steps:
Step 1
Step 2
Step 3
Select "MODIFY
DEVICES" Option
[1]
Select the respective
device Group
[2]
Select exact device you
wish to modify
[3]
02:ZONES/DEVICES
CONTACT SENSORS
MODIFY DEVICES
MOTION SENSORS
Z10:Motion Camra
ID No. 140-1737
Step 4
Step 5
Select the Parameter you
wish to modify
[4]
Modify the Parameter
Z10:LOCATION
See
[4]
When done
to step 2
Z10:ZONE TYPE
Z10:SET CHIME
Z10:PARTITIONS
Z10:DEV SETTINGS
– Modifying or Reviewing a Device
[1]
Enter the
Installer Menu
, select the "
02:ZONES/DEVICES
" option (see section 3.2) and then select the
"
MODIFY DEVICES
" option.
[2]
Select the respective group of the device you wish to review or modify. For example, "
MOTION SENSORS
".
[3]
Scroll the Device Group, identify by zone and/or ID number the exact device you wish to modify or review, for
example: "
Z10:Motion Camra
>
ID No. 140-1737
".
[4]
From here on the process is same as the configuration process that follows the enrollment of that device. To
continue, refer to Section 3.4.2 Part B. When done, the display will show the next device of the same type
(i.e. "Motion camera").
20
D-306919 KP-250 PG2 Installer’s Guide
