Manual VIPA System 200V
Chapter 3 Deployment IM 253DP
HB97E - IM - RE_253-xDPxx - Rev. 12/44
3-11
IM 253-xDPxx - DP-V0 slave - Project engineering
The module is configured by means of your PROFIBUS master
configuration tool. During the configuration you will assign the PROFIBUS
slave modules to your master module.
The direct allocation is defined by means of the PROFIBUS address that
you have to set at the slave module.
The Slaves are projected via gsd-file at the hardware configuration.
Each PROFIBUS module is delivered with a floppy disk by VIPA. The
floppy disc contains all GSD- and type files of the PROFIBUS modules from
VIPA as Cx000023_Vxxx.ZIP file. The assignment of the GSD-file to your
slave is shown in the "Readme.txt" file of Cx000023_Vxxx.ZIP.
Please install the required files from your floppy disc into your configuration
tool. Details on the installation of the GSD and/or type files are available
from the manual supplied with your configuration tool.
The VIPA WinNCS configuration tool already contains all GSD-files for the
VIPA components!
You may also download the GSD file via the Service area www.vipa.com >
Service > Downloads > PROFIBUS GSD files.
After the installation of the GSD-file you will find this entry e.g. in the
hardware catalog from Siemens at:
PROFIBUS DP>Additional field devices>I/O>VIPA_System_200V>
VIPA 253-2DP50
The project engineering of the IM 253DP slave at the IM 208 DP master
from VIPA is to be find in the description to the DP master.
The slave section that achieves firstly the DataExchange state (due to the
system, this is always the most left one), is automatically the active slave
and has the parameterization access at the peripheral modules.
For assigning new parameters to your remote I/O you should notice that
you need an active master-slave-system. Before the transfer of new
parameters is possible, both slaves must be in WAITPARAM state.
General
GSD file
Deployment at a
IM 208DP master
from VIPA
Parameterization
in a redundant
system
Summary of Contents for IM 253 DP Series
