VIPA IM 253 DP Series, Manual, Page: 12 / 100

Chapter 1 Basics and Assembly Manual VIPA System 200V
1-4 HB97E - IM - RE_253-xDPxx - Rev. 12/44
PS 207/2
X 2
3 4
VIPA 207-1BA00
L
N
P
E
100-240V AC
550-230mA
50-60Hz
OH
OL
OK
X1
1
2
3
4
+
-
+
-
OUT DC 24V /
∑ Ι:
2A
4A (peak)
G
DC 24V
DC 24V
With the System 200V the DC 24V power
supply can take place either externally or
via a particularly for this developed power
supply.
The power supply may be mounted on the
profile rail together with the System 200V
modules. It has no connector to the back-
plane bus.
CM 201
VIPA 201-1AA00
X 2
3 4
X2. X1.
The expansion modules are complemen-
tary modules providing 2- or 3wire con-
nection facilities.
The modules are not connected to the
backplane bus.
•
Profile rail 35mm
•
Dimensions of the basic enclosure:
1tier width: (HxWxD) in mm: 76x25.4x74 in inches: 3x1x3
2tier width: (HxWxD) in mm: 76x50.8x74 in inches: 3x2x3
Please note that you can only install head modules, like the CPU, the PC
and couplers at slot 1 or 1 and 2 (for double width modules).
[1] Head module
(double width)
[2] Head module
(single width)
[3] Periphery module
[4] Guide rails
1 2
4
3
0 1
Clack
D
P
Note
Information about the max.
number of pluggable modules
and the max. current at the
backplane bus can be found in
the "Technical Data" of the
according head module.
Please install modules with a
high current consumption direct-
ly beside the head module.
Power supplies
Expansion
modules
Structure/
dimensions
Installation