Vibration Research Corporation VibrationVIEW, Manual

Page: 281 / 333

Dialog Boxes 268
© 1995-2005 Vibration Research Corporation. All rights reserved.
In the Graph Traces selection area, you can define which traces you want to be displayed on your
graphs.
You can create Black-and-White or Color graphs using the Style drop-down list.
If you purchased more than one control loop, you will be able to define which control loop you want to
display.
Special graph type "Text Window" can be used to add additional space for text above or below the
graphs. To make a version 4 type "Text at Bottom" press the "Insert Graph" button to add another
graph to the bottom, then set the newly inserted graph type to "Text Window".
Tip: The 'Graph Legends' fields can also include report parameter fields so you can include specific
test values in these fields. For example, youcan use the setting "Started at [PARAM:StartTime]" to
insert the time the test was started. See '
Field Data Replicator report parameter names ' for a full
list of parameter fields that can be used here.
9.6.2 Field Data Replicator Graph
Field Data Replicator Graph
Use the Graph..Edit Graph menu command to change the settings of this graph.
9.6.3 Drive Check Dialog Box
Drive Check dialog box
This dialog box is automatically displayed when Field Data Replicator tests reach 20% and again at
50% of configured maximum drive level during the startup phase of the test. It is an indication your test
may be unable to reach level with
programmed test limits .
Abort Test : Abort the test and check your setup
Continue Test : Continue to run startup phase.
9.6.4 Import Universal File Format dialog
Import Universal File Format dialog box
Selecting the File..Edit Test Settings menu command or clicking the Settings button on the toolbar,
then clicking the "Import from UFF File" button, while an FDR test is open, accesses this dialog.
74
117
195
110