Vibration Research Corporation VibrationVIEW, Manual

Page: 125 / 333

Menu commands 112
© 1995-2005 Vibration Research Corporation. All rights reserved.
3.4.11 Stop Test
Stop Test command ( Test menu )
Use this command to stop any running test.
Shortcuts
Toolbar:
Control:
Keys:
F10
See Also:
Run Test
3.4.12 Advance to next level
Advance to next level command ( Test menu )
Use this command while a test is running to skip the remaining time in the current level, and to begin
the next level. Levels are defined in the "Schedule..." option of the
Test Settings dialog boxes.
Shortcuts
Keys: F11
3.4.13 Test Sequencer
Test Schedule command ( Test menu )
Use this command to build a schedule of tests. To create a test schedule, first define the tests and
then use this command to bring up the
Test Schedule dialog box to add the tests to the test
sequence.
The tests will be run in the defined order, with each test running for the duration specified within the
individual test's schedule. There will be a pause of approximately 5 seconds between each test.
The schedule will be aborted if a test is shut down prior to completion of the schedule. (For example, if
the operator presses the "Stop" button or a test encounters an error condition.)
3.4.14 Reset Filter Values
Reset Filter Values command ( Test menu )
Use this command to reset the filter values used by a Field Data Replicator test. Also use this
command to reset the FDR controller back to its initial state in case the filter values are corrupted as a
result of a loose or broken cable. In general, this command does not need to be used because the
filter will be automatically re-equalized every time a test is started.
111
110
286