ViaSat SurfBeam 2 Operation Manual Download Page 37

Page: 37 / 66

SurfBeam® 2 Pro Portable Terminal Operations Guide

Page 4-6

1172964, Rev. 002

ViaSat Proprietary Information

Modem State

Modem

: Displays the status of the modem (see section Table 4-2 regarding icon details).



Scanning: The modem is scanning or attempting to connect



Syncing: The modem is syncing with the network and antenna



Synced: The modem synced correctly



Ranging / Ranged: The modem is configuring operating ranges.



Network Entry: The modem is gaining access to the network



DHCP: The modem is configuring itself to connect with the network



Online: The modem is connected to the network and online

Online Time

: Displays the duration of time the modem has been online.

General

Rx Power (dBm)

: Displays the modem’s power level.

Rx SNR (dB)

: Displays the Signal to Noise Ratio.

ODU Telemetry Status

: Displays if the modem is collecting and transmitting data.

Cable Resistance (Ohms)

: Displays the amount of resistance the cable is producing (lower is better).

Cable Attenuation (dB)

: Displays the level of attenuation occurring between the modem and antenna.

Identification

IP Address

: Displays the modem’s IP address.

Software Version

: Displays the modem’s software version.

Serial Number

: Displays the modem’s serial number.

IFL Type

: Displays the IFL’s current operating state.

MAC Address

: Displays the modem’s MAC address.

Hardware Version

: Displays the modem’s hardware version.

Part Number

: Displays the modem’s part number.

Ethernet Interface Statistics

Transmitted Packets

: Displays the number of received IP packets.

Received Packets

: Displays the number of received IP packets.

Loss of Sync Count

: Counts the number of sync losses for the current connection.

Transmitted Bytes

: Displays the number of bytes transmitted to the modem.

Received Bytes

: Displays the number of bytes received by the modem.

Summary of Contents for SurfBeam 2



































































Search results

Summary of Contents for SurfBeam 2

Reviews:

Related manuals for SurfBeam 2

Brands by name

Popular brands

ViaSat SurfBeam 2, Operation Manual

Search results

Summary of Contents for SurfBeam 2

Reviews:

Related manuals for SurfBeam 2

Brands by name

Popular brands