ViaSat SurfBeam 2, Operation Manual

Page: 27 / 66

SurfBeam® 2 Pro Portable Terminal Operations Guide
© 2014 ViaSat, Inc.
Page 3-4
All Rights Reserved
1172964, Rev. 002 ViaSat Proprietary Information
Step Action Image
5. Loosen the “AZ Course Adjustment” knob and SLOWLY swing the
Azimuth/Elevation Assembly to the left and right to identify the
full range where the modem emits a “Ring-Ring” tone.
NOTE : If you don’t hear a “Ring-Ring” tone, use the “EL Fine
Adjust” knob to raise or lower the TRIA angle (a degree at a
time) until the you hear the tone.
6. After Identifying the horizontal range where the modem emits a
“Ring-Ring” tone, rotate the Assembly back across that range
until you hear a “Short Beep” tone and tighten the “AZ Course
Adjustment” lever.
The “Short Beep” tone will change to either a “Low/Slow” tone or
a “High/Fast” tone, indicating the unit is ready for fine-tuning.
NOTE : If you continue to hear “Short Beep” tone and NOT a
“Low/Slow” or a “High/Fast” tone, use the “EL Fine Adjust”
knob to raise or lower the TRIA angle (a degree at a time) until
the you hear one of the two tones.