SurfBeam® 2 Pro Portable Terminal Operations Guide
© 2014 ViaSat, Inc.
Page 2-4
All Rights Reserved
ViaSat Proprietary Information
2.3.2
Unpacking
The Pro Portable components come in a rugged, protective transit case with three layers and an attached accessory
bag (Figure 2-3). Each layer and the bag provide a group of components (Table 2-1) that need to be assemble before
moving on in the assembly process.
Figure 2-3: Component Assembly Layers
Table 2-1: Component Assembly List
Layer
Component
Description
Image
Layer 1
Tripod
The Tripod has three adjustable legs (with pivot
feet) that connected to center pole to which the
Azimuth/Elevation Assembly head connects.
Azimuth (Az) /
Elevation (El)
Assembly
The head has four adjustment levers to point and
lock the assembly head once the fully assemble
unit has been pointed. This component mounts
atop the tripods center pole and provides a
platform base for the installation of the TRIA and
center reflector
Center Reflector
The center reflector provides the middle piece of
the antenna dish and mounts to the
Azimuth/Elevation Assembly.
Layer 2
Edge Reflector
(x2)
The edge reflector provides the edge piece of the
antenna dish and mounts to either side of the
center reflector. These two parts are
interchangeable.
