SurfBeam® 2 Pro Portable Terminal Operations Guide
© 2014 ViaSat, Inc.
Page 2-13
All Rights Reserved
ViaSat Proprietary Information
2.4
Disassemble and Repack
The SurfBeam 2 Pro Portable Terminal will need to be stowed after each use. Table 2-3 provides the instructions on
this process.
Table 2-3: Disassembly and Repacking Process
Step
Action
Image
1.
Power down the modem assembly using the on/off switch.
2.
Unplug the all the cables from the modem assembly, TRIA, and
power brick, and place them back into the pouch located on the
underside of the case lid.
3.
Hold down the Modem push-pin, remove it from Tripod leg, and
place the modem and power brick in its place on the bottom
layer of the case.
4.
Re-attach plug dust covers on the modem assembly. Place the
assembly and power brick in its place on the bottom layer tray of
the case.
5.
Fold the tray’s cover down to cover the equipment and using the
two straps located on the tray’s handle side: (1) loop the strap
through the metal ring, (2) pull the strap tight, and (3) lay it back
over itself so that the Velcro attaches.
NOTE
: Pervious versions of the Pro Portable case did not have
restraining straps. If there are no straps, disregard this step.
