OPERATORS MANUAL
ORION II
Orion II 500-10000 Operators
Page 43 of 95
Manual Part no: DOMAON0100 Issue A
April 2008
6.2.3 PUMP
The Pump screen is an overview of the Pump stage as shown below:-
During normal opera
tion the pump is controlled in “AUTO” by either a target flow or target pressure.
If being controlled by a pressure then the target flow box is removed and a target pressure box is
seen above the pressure bar readout.
Via the “Pump Control Centre” panel, the pump may be put into manual control and an associated
operating percentage keyed in. While in manual mode, the little “A” (auto) next to the pump is
replaced by a flashing “M” (manual).
Also the words “Manual Override Selected” is displayed on all screens so the operator knows
something has been left in manual as seen below:-
