34
CineCast HD Version 2.6 Installation and User Manual
Software Installation
Installing CineCast 2.6 Software (Windows 2000)
1. Install MDAC 2.6, if it is not already installed on your system. Again you
can download this from the Internet, or you can install it from the installation
CD-ROM. To use the CD-ROM, follow these steps:
• Insert the CD-ROM into the CD-ROM drive.
• When the Autorun setup screen (Figure 1-3) appears, select the “Explore
This CD” option (Figure 1-4).
• Double-click on the “System” folder.
• Double-click on the “MDAC 2.6" folder.
• Double-click on the
mdac_typ.exe
.
• The application will extract files, then ask you to read a license agreement.
After reading the agreement, check the “Accept License Agreement”
checkbox. Click Next.
• If you are asked to restart, allow the system to reboot before continuing.
2. The Autorun setup screen (Figure 1-3) should appear after the system restart.
If it does not, use Windows Explorer to select and run
setup.exe
from the CD-
ROM or click Start > Run.
3. From the Autorun setup screen, select Install “CineCast,” then follow the
steps listed below:
• Read the Welcome screen (Figure 1-5), then click Next.
• On the “Choose Destination Location” screen (Figure 1-6), accept the
C:\ Program Files\ Vela Research
destination, as listed, by clicking Next.
Do not change the destination!
The default destination is required for
proper decoder operation.
4. On the “Select Components” screen (Figure 1-7):
Figure 1-21. System Settings Change Message Box
Summary of Contents for 2000-0600
Page 10: ......
Page 49: ...Chapter 1 Getting Started 39 Customer Support Figure 1 23 CineCast HD Rear Panel View...
Page 52: ......
