154
CineCast HD Version 2.6 Installation and User Manual
Color Bars –
When the Color Bars button is clicked, color bars and an audio tone
will be output on the selected decoder channel in either NTSC or PAL format,
depending on the default resolution. To end the bars and tone signal, click on the
Color Bars button again (toggle). Note that, if clicked, the bars and tone signal will
override a video clip that may be currently playing back.
From the Video
tab, click on the Reset button to revert to the previously saved
settings. Click on Factory Settings to revert to factory default settings. Click
OK to save current (changed) settings. Click Cancel to dismiss the window
without saving any changes that may have been entered.
Click OK to save current (or changed) settings and dismiss the window. Click
Cancel to dismiss the window without saving any changes that may have been
entered. Click Apply to save the changes without dismissing the window.
Playback Controller Window
This view of the Playback Controller shows the names of all controller functions.
Figure 3-23.Playback Controller Main Window with Item Identification
Summary of Contents for 2000-0600
Page 10: ......
Page 49: ...Chapter 1 Getting Started 39 Customer Support Figure 1 23 CineCast HD Rear Panel View...
Page 52: ......
