160
CineCast HD Version 2.6 Installation and User Manual
Video I/O:
• Digital Video Output
SMPTE 292M HD SDI
Signal Level: 800mv
±10%
Rise and Fall Time: <270 pS
Overshoot: <10%
• Component Analog Video Output
Analog Component YUV or RGB with Hsync & Vsync, software selectable out-
put format (P&D connector)
• Composite Analog Video Output / Composite SD Monitoring Output
Connector: P&D
Output Level: 1 volt peak-to-peak
Frequency Response: NTSC:0 to 4.0MHz ±1dB; PAL:5.8MHz +1, -7dB
Signal to Noise: >65dB, unweighted
Differential Gain: ±2%
Sync Amplitude: NTSC: 40 IRE ±1 IRE; PAL: 43 IRE ±1 IRE
Color Burst Amplitude: NTSC: 40 IRE ±1 IRE; PAL: 43 IRE ±1 IRE
Differential Phase: ±1.3%
Luminance Level Accuracy: ±1 IRE
Chrominance Level Accuracy: ±1 IRE
• Analog genlock input (BNC connector)
Designed for standard NTSC/PAL video input levels (1V peak-peak)
One genlock input per channel
Internally jumperable 75-ohm termination (±2%). Units delivered with
termination jumpers installed.
Connector type: BNC
Video Decoder:
• Demultiplexing of Transport and Program streams
• MPEG Stream Types
Support for all 18 ATSC formats
Support for MPEG-2 Program & Transport streams
Support for DVB compliant MPEG-2 Transport streams.
• Stream Data Rate
Up to 15 Mbps (SD 4:2:0 streams)
Up to 50 Mbps (SD 4:2:2 streams) (optional)
Up to 80 Mbps (HD 4:2:0 streams)
(Phase 2) Up to 80 Mbps (HD 4:2:2 streams)
• Chroma Profile Support
• 4:2:0 stream decoding for SD streams
• 4:2:0 decoding support for HD resolution streams
• 4:2:2 HD/SD decoding support (optional)
Summary of Contents for 2000-0600
Page 10: ......
Page 49: ...Chapter 1 Getting Started 39 Customer Support Figure 1 23 CineCast HD Rear Panel View...
Page 52: ......
