15
Vega’s C-
6124
4.
Functional Description
4.1
Touchscreen
The following pages describe the various touchscreen menus and their functions available on the C-6124. Upon
turning the power on the console will boot-up in the main menu and you are greeted by the initial display. (Figure
4.1).
Figure 4.1 Main Menu
GRPSEL/XPATCH:
This button may be changed in the programming mode to be either a toggle on/off group select button or a
preprogrammed crosspatch group select button. The change is done in the CROSSPATCH GROUP SELECT screen
found in section 5.1.6 of the programming section of the manual.
The GRPSEL button is a toggle ON/OFF button which disables the 1ofN functionality of the console. When
the GRPSEL button is illuminated the operator is able to set up a Simul-group of as many cards as is desired. To
activate the Group Select mode the operator presses the GRPSEL button. The button will illuminate. As long as the
button is illuminated the operator may add or delete lines to the group. Dial-up lines must have an active call to be
included in a group. When the operator is finished setting up the Simul-group the operator presses the GRPSEL
button again to revert back to the 1ofN mode.
The lines are allowed in a group are restricted by the TX Block settings set in System programming mode. In
the example where line 1 blocks lines 2 and 3 the operator may include 2 and 3 in the group only if line 1 is not part of
the group. If line 1 is included in the group the console will not allow lines 2 and 3 to be added. If line 2 or 3 are
already in the group when line 1 is Selected line 1 will be included in the group, but lines 2 and 3 will drop out.
The XPATCH button will transfer the user to a preprogrammed crosspatch group select screen. From this screen one
of eight preprogrammed groups may be selected.
GRPSEL
RX ALL
TX ALL
MONITOR
MUTE
SIMUL G
DIAL
ALERT
INTERCOM
F1
F3
F4
>>>
SEL CH: MT. WILSON F6
F2
