Remote Control Console
16
Figure 4.2 Xpatch Group Select
RX ALL (Receive All):
Push to monitor all lines
that are not in the Select mode
.
Any line that is in the Select mode
will automatically become part of the Unselect group when it is taken out of Select mode.
TX ALL (Transmit All)
: This feature gives the user a convenient means of Selecting all lines for Simul-transmissions
without having to group select one at a time. As in group select, if a dial-up line is to be included in this feature, the
line must already be dialed-up.
To initiate Simulcast, momentarily touch the "TX ALL" on the display. The line description will change to "Group
Select Mode", and all available lines will automatically be Selected.
To disengage Simulcast, simply Select a single line in the usual manner.
The TX ALL function will not include any line which TX Blocks any other line. For example, If line 1 TX Blocks lines
2 and 3 a TX ALL command will include lines 2 and 3, but not line 1 (assuming lines 2 and 3 do not TX Block any
other card.
CTCSS MONITOR:
When touched momentarily, this feature causes the Selected base station with a CTCSS
decoder to momentarily unmute so that the dispatcher may monitor for activity on the air.
This reduces the possibility of accidentally interfering with other users on the channel who may be using a different
CTCSS tone. This capability is required by FCC regulations.
TIMED MUTE
: When touched, TIMED MUTE mutes all "Unselected" audio for fifteen seconds. This feature is
useful when the dispatcher wishes to concentrate on the Selected channel without interfere nce from the other lines.
The mute time is programmable up to 59 seconds. The programming is done in the System programming menu
01
02
03
04
05
06
07
08
XPATCH GROUP SELECT
SEL CH: MT. WILSON
<<
SQUAD 56
FIRE CAPTAIN
MAINTENANCE
