Remote Control Console
14
Release Pushbutton:
Directly below the Unselect pushbutton is the release pushbutton. Pressing this pushbutton
for two seconds will send a double monitor burst to the radio control panel (RP250 or RP251) terminate the call by
disconnecting the line from the central office. The red light on the pushbutton will illuminate while the pushbutton is
pressed. The red light will light when the line is being TX Blocked.
Instant PTT Pushbutton:
Located directly below the release pushbutton, when pressed and held, will cause the line
card to generate the required PTT tone sequence. The red light on t he instant PTT pushbutton will illuminate while
the pushbutton is pressed.
Unselect Volume Control:
Adjusts the speaker level of the individual Unselect audio.
