Remote Control Console
32
5.1.7 Programming at the system level
à
à
PARALLEL CROSSPATCH NOTIFICATION
and MUTE DURATION
SYSTEM PROGRAMMING MENU 1
SYSTEM PROGRAMMING MENU 2
OTHER PARAMETERS programming screen
PARALLEL CROSSPATCH NOTIFICATION: The C-6124 has an option that uses DTMF characters “A” and “B” to
communicate to parallel consoles that a crosspatch has been set up. When this option is enabled DTMF “A plus
*”characters will be sent out on the lines that are placed in a crosspatch. Parallel consoles will decode this “A plus
*” and disable their respective line cards. This ensures that parallel consoles will not interfere with the complex tone
signaling that is required in a crosspatch situation. A DTMF “B” will tell parallel consoles that a particular line has
been removed from the crosspatch and may be used in standard operations. Note that this option must be OFF if the
communications system uses the DTMF alpha digits. To turn this option OFF or ON press the button which
displays the current condition.
MUTE TIME OUT: When the MUTE button on the front touchscreen is pressed, the Unselect speaker will mute for a
specific amount of time and then the speaker will revert to normal activity. This amount of time is programmable from
0 to 99 seconds. Press the UP and DOWN buttons until the proper time is displayed.
MUTE TIME OUT
36
SECONDS
UP
DOWN
<<
OTHER PARAMETERS
PARALLEL
CROSSPATCH
NOTIFICATION
OFF
LINE
04
01
02
03
SYSTEM PROGRAMMING
EDIT MEMORY DIALS
EDIT SIMUL GROUP NAMES
EDIT CROSSPATCH GROUP NAMES
OPTION MENU 2
OPTION MENU 1
05
08
LINE
SYSTEM PROGRAMMING
SIMUL GROUP SELECT
CROSSPATCH GROUP SELECT
OTHER PARAMETERS
OPTION MENU 3
06
OPTION MENU 2
06
07
