Vega C-6124 Technical Manual Download Page 32

Page: 32 / 80

Remote Control Console

5.1.1 Programming at the system level

MEMORY DIAL NAME EDITING

SYSTEM PROGRAMMING MENU 1

MEMORY DIAL SELECTION

From MENU 1 press the

button. This will bring up the MEMORY DIAL SELECTION

menu. Select the number of the memory dial to be programmed.

MEMORY DIAL SELECTION button definition

Brings up the NAME/NUMBER screen for parameter programming.

MORE

This button brings up memory dial spaces 09 through 16.

This button returns to MENU 1.

NAME/NUMBER screen

ALPHANUMERIC KEYPAD

Selecting a memory number from the MEMORY DIAL SELECTION screen will bring up the

NAME/NUMBER screen. From this screen the alphanumeric name or the number to be dialed may be programmed.

NAME/NUMBER screen button definition:

SYSTEM

------ Pressing this button returns the C-6124 to MENU 1

---------------- Pressing this button brings up the ALPHANUMERIC KEYPAD for name programming.

---------------- Pressing this button accessess the NUMERIC KEYPAD for dial number programming.

---------------

Pressing this button returns the C-6124 to the MEMORY DIAL SELECTION screen

ALPHANUMERIC KEYPAD screen button definition:

When

is pressed on the NAME/NUMBER screen the ALPHANUMERIC KEYPAD will appear. The

assigned name will appear at the top of the screen. If no name has been assigned the top of the screen will contain 12
blocks. A name may consist of up to 12 characters from the keyboard.

This button aborts the name programming operation and brings back the menu.

SAVE

This button saves the displayed entry.

This button moves the cursor one space to the left with no change to the name.

SPACE

This button provides a blank in the name.

This button moves the cursor one space to the right with no change to the name.

5.1.2 Programming at the system level

MEMORY DIAL NUMBER EDITING

→

SAVE

SPACE

←

1 2 3 4 5 6 7 8 9 0

Q W E R T Y U I O P

A S D F G H J K L ,

Z X C V B N M - . :

S Q U A D 5 6

SAVE

SYSTEM

EDIT MEMORY DIALS

EDIT NAME

SQUAD 56

EDIT NUMBER

13165556309

EDIT MEMORY DIALS

SQUAD 56

FIRE CAPTAIN

MAINTENANCE

EDIT MEMORY DIALS

SQUAD 56

FIRE CAPTAIN

MAINTENANCE

SAVE PROGRAMMING INFORMATION

LINE

SYSTEM PROGRAMMING

EDIT MEMORY DIALS

EDIT SIMUL GROUP NAMES

EDIT XPATCH GROUP NAMES

OPTION MENU 2

OPTION MENU 1

LINE

SYSTEM PROGRAMMING

EDIT MEMORY DIALS

EDIT SIMUL GROUP NAMES

EDIT X[ATCJ GROUP NAMES

OPTION MENU 2

OPTION MENU 1

Summary of Contents for C-6124

















































































Search results

Summary of Contents for C-6124

Reviews:

Related manuals for C-6124

Brands by name

Popular brands

Vega C-6124, Technical Manual

Search results

Summary of Contents for C-6124

Reviews:

Related manuals for C-6124

Brands by name

Popular brands