Remote Control Console
18
DIAL:
This function is the doorway into the DTMF dialing screen. When touched, the display changes to the
manual dial keypad screen (Figure 4.4). Here the user can generate DTMF over the air on tone lines or manually dial a
phone number for the DLM or PLM lines.
Figure 4.4 Manual Dial Keypad Screen
If you are dialing a mobile selective calling address, you first must enter the number and then Select the appropriate
TLM. Even if the TLM is currently in the Select mode you must reselect it to initiate the tone sequence.
When manually dialing a phone number, you must first dial the number and then Select the PLM. Upon Selecting the
PLM, the line is seized and the dialed phone number is sent out.
On the Manual Dial Screen, pushing “<<” returns the display back to the main menu, pressing memory dial brings up
the Speed-Dial Screen (Figure 45) for calling any one of sixteen preset numbers on either a DLM or PLM line. In the
Speed-Dial Screen, touching “<<” toggles the user back to the manual dial screen (Figure 4.4). Touching “MORE”
brings up the next speed dial screen (speed dial presets 09 through 16) as shown in (Figure 4.6).
A dialed number will appear here
<<
SEL CH: MT. WILSON F2
3
2
1
6
5
4
9
8
7
#
0
*
MEMORY
RECALL
CLEAR
