Remote Control Console
34
5.1.9 Programming at the system level
à
à
RX BLOCK
SYSTEM PROGRAMMING MENU 1
SYSTEM PROGRAMMING MENU 2
SYSTEM PROGRAMMING MENU 3
PROMPT FOR LINE TO PROGRAM
RX BLOCK PROGRAMMING SCREEN
SAVE THE DESIRED CONFIGURATION
The RX Block feature allows the technician to set up groups of lines which will mute their RX audio when a
certain line is transmitting. In the above example, line 4 has been programmed to RX Block lines 1,3, and 5 when line 4
is in the PTT condition. This is a one way effect. Transmitting over line 1 will not mute any of the other lines. For
this to occur, line 1 must be programmed to RX Block line 4. Note that an RX Blocked line will not be allowed in a
crosspatch with the line that blocks it.
To program an RX Block group get to the RX Block programming screen as shown in the steps above.
When prompted to Select a line for programming press the Select button of the card to be programmed. The previous
program will appear. You may then add or subtract any number of lines to the group. When completed, press the
SAVE button. The console will then prompt you for another line to be programmed.
When RX Block programming is completed press the << button to return to the System programming
screens.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
<<
SAVE
SELECT LINE FOR RX BLOCK PROGRAMMING
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
<<
SAVE
RX BLOCK FOR LINE 04
1
3
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
<<
SAVE
SAVE
RX BLOCK FOR LINE 04
1
3
5
09
11
12
LINE
SYSTEM PROGRAMMING
FUNCTION TONE PARAMETERS
RX BLOCK GROUPS
TX BLOCK GROUPS
OPTION MENU 1
10
OPTION MENU 3
LINE
04
01
02
03
SYSTEM PROGRAMMING
EDIT MEMORY DIALS
EDIT SIMUL GROUP NAMES
EDIT CROSSPATCH GROUP NAMES
OPTION MENU 2
OPTION MENU 1
05
08
LINE
SYSTEM PROGRAMMING
SIMUL GROUP SELECT
CROSSPATCH GROUP SELECT
OTHER PARAMETERS
OPTION MENU 3
06
OPTION MENU 2
07
