Operation
66
VideoJet 400
Connection
tear-down
The connection tear-down is only possible using the terminal
program.
)
Enter the command
d
in the terminal program to tear down the
existing connection.
Multiplex mode
The multiplex mode is not expedient for pure hardware connections
between two or more
VideoJet
units. During multiplex mode, the
images of the cameras connected to the transmitter are updated
and transmitted in turn. All the images can be seen simultaneously
in a quad split in the window of the web browser.
As only a single monitor is connected to a
VideoJet
receiver, the
images of all the cameras have to be displayed on this monitor. As
a quad split is not possible here, the images are displayed in a quick
succession in multiplex mode.
Operation with
software decoder
VideoJet
transmitters in conjunction with the programs
PROVIDo
or
PROVILite
form a powerful system solution.
PROVIDo
or
PROVILite
are programs for the operation, con-
trol and management of CCTV systems (e.g. video surveillance
systems) at remote locations. They run under the Windows operat-
ing system. They serve primarily to decode the video, audio and
control data received from a remote transmitter.
During the operation of
VideoJet 400
with
PROVILite
or
PROVIDo
, a wide range of operating and configuration possibili-
ties are offered to you. For further details, refer to the documenta-
tion of the software concerned.
Note
Ensure that only
one
camera is ever selected at a time with pure
hardware connections.
