Product description
19
VideoJet 400
Rear
VideoJet 400
(Cabinet version)
1
Video inputs
VIDEO 1
to
VIDEO 4
BNC connectors for connection of the video sources
2
DIP switch
75 OHM ON
for termination of the corresponding video input if the video
signal is not looped through
3
Audio input
AUDIO IN
3.5 mm mono jack bush for connection of the audio source
4
Audio output
AUDIO OUT
3.5 mm mono jack bush for connection of a loudspeaker
5
Screw clamp
INPUTS
for connection of alarm sensors or switches
6
Screw clamp
OUTPUTS
relay outputs for switching of external devices (e.g. lamps)
7
Serial interface
COM
9-pin sub-D connector (m) for transmission of control data and
for configuration with the terminal program
8
RJ45 jack
ETHERNET
for connection with the network
9
Video output
VIDEO OUT
BNC connector for connection of a monitor
