Configuration with web browser
34
VideoJet 400
General procedure for configuration
The configuration pages allow you to conveniently configure the
VideoJet 400
. When you call up one of the configuration pages,
you will see the current settings. You can change the settings by
entering new values or by selecting a predefined value from a list
box.
All configuration settings are stored in the non-volatile memory of
the
VideoJet 400
so that the settings are retained even in the
event of a power failure.
Edit settings
)
Click on the button
Configuration
to switch to the configuration
pages. Page
Identification
is displayed.
)
Click in a text field and enter new values or texts, or
)
click on a list field to select a different setting.
Execute changes
After every change, click on the corresponding button
Set
to trans-
mit the change to the
VideoJet 400
where it is saved.
’Help’ pages
Each configuration page offers the possibility of calling up informa-
tion about the parameters on the page. At the bottom of each page
you will see the link
Help on this page?
)
Click on the link to open the 'Help' page.
Attention!
Save every setting with the button
Set
. Clicking the button
Set
only
saves the settings in the according field (blue frame). All other set-
tings remain unconsidered.
