Configuration with web browser
47
VideoJet 400
Connections
on Alarm
You have the possibility of setting the behaviour of the
VideoJet
in the event of an alarm.
For example, in the event of an alarm a connection can be automa-
tically set up to a predetermined IP address (
VideoJet
receiver or
PC with receiver software).
Alternatively alarm statuses can also be documented by e-mail. A
receiver who does not have a video reception device can thus also
be informed. In this case, an e-mail with an attached JPEG image
is sent to a predetermined e-mail address.
Connect on alarm:
Select
On
to automatically set up a connection to a predetermined
IP address. Otherwise select
Off
.
Live video receiver IP address:
Enter here the IP address to be notified in the event of an alarm.
Remote password:
If applicable, enter the password to get access to a transmitter unit.
Live video auto-connect:
Select
On
if at each restart, e.g. after a connection breakdown or
network failure, an active connection is to be automatically set up
to the IP address defined above. Otherwise select
Off
.
Send alarm e-mail:
Select
On
to send an alarm e-mail in the event of an alarm.
Alarm e-mail address:
Enter the e-mail address for the alarm e-mails.
