Installation
27
VideoJet 400
Switching on / Switching off
Mains connection
The scope of supply of the
VideoJet 400
in the desktop version
includes a plug-in power pack. The control cabinet version of the
VideoJet 400
has an integral power pack.
The
VideoJet 400
has no mains power switch. When you have
connected the plug-in power supply unit to the
VideoJet 400
and inserted the plug of the plug-in power supply unit into a plug
socket, the server is ready for operation.
)
Push the plug of the power supply unit cable into the jack POWER
until it latches.
)
Plug the plug-in power supply unit into a fused mains power plug
socket. The green LED POWER on the front of the
VideoJet
400
lights up and the server is ready for operation.
When the network connection has been correctly made, the green
LED ETHERNET also lights up. The flashing yellow LED signals
the transport of data packages via the network.
Attention!
Use only the plug-in power supply unit supplied for operation of the
VideoJet 400
. Take appropriate measures or install the appro-
priate equipment to prevent surge voltages, interference voltage
peaks or power failures in the mains supply from reaching the
server.
Connect the
VideoJet 400
to the mains power supply only when
all the other connections have been made.
