Installation
22
VideoJet 400
Cabinet installation
The control cabinet version of the
VideoJet 400
is designed for
installation in standard 19" slots. The device has an integral power
pack and is supplied with two mounting brackets on the side for
installation.
)
If necessary, screw both brackets to the housing of the
VideoJet 400
.
)
Place the
VideoJet 400
into the control cabinet and secure it
with four screws.
)
Insert the power lead supplied into the mains socket on the rear of
the device.
Attention!
During control cabinet installation, ensure adequate ventilation of
the
VideoJet 400
: There must be a clearance to the left and
right of the device of at least 5 cm and at least 10 cm to the rear.
The ambient temperature must lie b5 and +40 °C, the
relative humidity must not exceed 80%.
The
VideoJet
gives off heat during operation. Therefore ensure
adequate ventilation and a sufficient distance from other heat-
sensitive equipment or objects.
When installing other equipment, direct contact with the
VideoJet
is permitted if the surface temperature of the neighbouring equip-
ment does not 40 °C.
