Configuration with web browser
53
VideoJet 400
Mail server IP address:
Enter the corresponding IP address here if the device is to use the
e-mail function. Outgoing e-mails are transmitted via the entered
address to the mail server. Otherwise the field can be left blank
(0.0.0.0).
Mail reply IP address:
Enter an e-mail address here if the device is to use the e-mail func-
tion. The input informs the receiver of an e-mail about the sender.
Otherwise the field can be left blank (0.0.0.0).
Multilink –
Multicast
In addition to the 1:1 connection between one transmitter and one
receiver (unicast), the
VideoJet 400
offers the possibility of
receiving the signals from a transmitter with several receivers
simultaneously. This is performed either by duplicating the data
stream in the transmitter and subsequent distribution to several
receivers (multi-unicast) or by distributing a single data stream in
the network proper to several receivers of a defined group (multi-
cast).
Enable multilink H.323:
In multilink mode, the data stream is duplicated in the
VideoJet
400
or in the network (group IP). The data are encoded according
to the H.323 standard and are thus compatible with other applica-
tions (e.g. MS NetMeeting).
Benefits of the H.323 coding are a higher data rate with a lower
bandwidth in the network and a faster and more stable communica-
tion thanks to the robust data protocol.
The
VideoJet 400
supports multilink mode with a maximum of
5 simultaneously connected receivers, whereby an audio voice link
is only possible to the first receiver (the first connection set up).
Note
A precondition for multicast mode is a multicast-compatible network
using the UDP protocol and the IGMP protocol. Other group man-
agement protocols are not supported. The TCP protocol does not
support multicast connections.
