Vauxhall Mokka 2014 Owner'S Manual Download Page 150

Page: 150 / 217

Driving and operating

149

Turn the fuel filler cap slowly

anticlockwise to open.
The fuel filler cap can be retained in

the bracket on the fuel filler flap.
For refuelling, fully insert the pump

nozzle and switch it on.
After automatic cut-off, it can be

topped up with max. two doses of fuel.

Caution

Wipe off any overflowing fuel

immediately.

To close, turn the fuel filler cap

clockwise until it clicks.
Close the flap and let engage.

Liquid gas refuelling

Follow the operating and safety

instructions of the filling station when

refuelling.
The filling valve for the liquid gas is

behind the fuel filler cap.

Unscrew protective cap from the filler

neck.

Screw the required adapter hand-

tight onto the filler neck.

ACME Adapter: Screw the nut of the

filling nozzle onto the adapter. Press

locking lever on filler nozzle down.
DISH (Italy) filler neck: Place the filler

nozzle into the adapter. Press locking

lever on filler nozzle down.
Bayonet filler neck: Place filler nozzle

on the adapter and turn to the left or

right through one quarter turn. Pull

locking lever of filler nozzle fully.
EURO filler neck: Press the filler

nozzle onto the adapter until it

engages.

Summary of Contents for Mokka 2014


























































































































































































































Search results

Summary of Contents for Mokka 2014

Reviews:

Related manuals for Mokka 2014

Brands by name

Popular brands

Vauxhall Mokka 2014, Owner'S Manual

Search results

Summary of Contents for Mokka 2014

Reviews:

Related manuals for Mokka 2014

Brands by name

Popular brands