Vauxhall Mokka 2014 Owner'S Manual Download Page 134

Page: 134 / 217

Driving and operating

133

accelerated or decelerated to a speed

between 3 and 12 mph. When DCS is

active,

flashes.

DCS will only be activated on roads

with a certain incline.

Deactivation

DCS is deactivated if the vehicle is

decelerated below 1.2 mph or

accelerated above 22 mph.

Switching off

Press button

again. Control

indicator

extinguishes.

At speeds above 37 mph the system

is deactivated automatically.

Driver assistance

systems

Warning

Driver assistance systems are

developed to support the driver

and not to replace the driver's

attention.
The driver accepts full

responsibility when driving the

vehicle.
When using driver assistance

systems, always take care

regarding the current traffic

situation.

Cruise control

The Cruise control can store and

maintain speeds of approx. 20 to

120 mph. Deviations from the stored

speeds may occur when driving uphill

or downhill.

For safety reasons the cruise control

cannot be activated until the foot

brake has been operated once.

Activating in first gear is not possible.

Do not use the cruise control if it is not

advisable to maintain a constant

speed.
With automatic transmission, only

activate cruise control in automatic

mode.
Control indicator

89.

Switching on

Press button

: control indicator

instrument cluster illuminates white.

Summary of Contents for Mokka 2014


























































































































































































































Search results

Summary of Contents for Mokka 2014

Reviews:

Related manuals for Mokka 2014

Brands by name

Popular brands

Vauxhall Mokka 2014, Owner'S Manual

Search results

Summary of Contents for Mokka 2014

Reviews:

Related manuals for Mokka 2014

Brands by name

Popular brands